...

API Casing Table: Sizes, Weights, Dimensions and Grades

Steel casing pipes with open ends and threaded coupling

Table of Contents

An API casing table identifies standardized casing outside diameter, mass designation, wall thickness, internal clearance, grade, and connection data. Engineers use these values as inputs for well-specific design calculations, not as standalone pressure ratings.

This guide explains the dimensional, grade, connection, and design checks needed before specifying API 5CT casing; verify each size-and-mass combination against the governing standard. 

API 5CT Casing Size and Dimension Table

The table contains selected API 5CT dimensional combinations, not every permitted size and mass. Values apply to standard-density carbon and alloy steel. The coupling dimensions shown are for regular-OD long round thread casing. Review seamless pipe products when comparing manufacturing routes.

Casing OD (in/mm) Mass Designation (lb/ft) Plain-End Linear Mass (kg/m) Wall Thickness (in/mm) Nominal ID (in/mm) Drift Diameter (in/mm) End Finish / Connection Coupling OD (in/mm) Applicable API Grades / Types
4 1/2 / 114.30 11.60 16.91 0.250 / 6.35 4.000 / 101.60 3.875 / 98.42 LC/LTC 5.000 / 127.00 J55, K55, N80, L80, C90, R95, T95, P110
5 1/2 / 139.70 20.00 29.52 0.361 / 9.17 4.778 / 121.36 4.653 / 118.18 LC/LTC 6.050 / 153.67 N80, L80, C90, R95, T95, P110
7 / 177.80 29.00 42.78 0.408 / 10.36 6.184 / 157.08 6.059 / 153.90 LC/LTC 7.875 / 200.03 N80, L80, C90, R95, T95, P110
9 5/8 / 244.48 47.00 68.75 0.472 / 11.99 8.681 / 220.50 8.525 / 216.54 LC/LTC 10.625 / 269.88 N80, L80, C90, R95, T95, P110, Q125
13 3/8 / 339.72 54.50 78.55 0.380 / 9.65 12.615 / 320.42 12.459 / 316.45 LC/LTC 14.375 / 365.13 J55, K55

Here, applicable grades mean that the selected size, mass, and LC end-finish combination appears in the API casing list. Other connections can change coupling dimensions and calculated threaded-and-coupled mass.

How to Read the API Casing Table

Start with outside diameter, which controls hole and annular clearance. The mass designation identifies an API size-weight combination; it is not the measured plain-end mass. The API mass designation is a nominal threaded-and-coupled size-weight label. Calculated plain-end linear mass and connection-related mass gain or loss are separate values; neither is the measured mass of every finished joint. 

Nominal ID equals OD minus twice the nominal wall thickness. The specified drift diameter is the mandrel diameter used to check passage through the finished pipe; it is a clearance-test value, not a measured minimum ID. Use the specified drift diameter for the initial tool-clearance check, and separately verify any tighter restriction at connections or elsewhere in the planned tool path. 

Casing OD, ID, wall thickness and drift mandrel schematic

API Casing Grades, Strength Properties and Service Considerations

Yield strength sets one material input for burst, collapse, and tensile calculations. It does not establish corrosion resistance, connection capacity, or sour-service suitability.

API Grade / Type Minimum Yield Strength (ksi/MPa) Maximum Yield Strength (ksi/MPa) Minimum Tensile Strength (ksi/MPa) Required Heat Treatment Service and Selection Notes
H40 40 / 276 80 / 552 60 / 414 None specified Lower-strength casing; verify load margin
J55 55 / 379 80 / 552 75 / 517 No single mandatory route Lower-load service; weaker in tension than K55
K55 55 / 379 80 / 552 95 / 655 No single mandatory route Same yield range as J55, higher tensile minimum
N80 Type 1 80 / 552 110 / 758 100 / 689 Normalized or normalized and tempered General higher-load service
N80Q 80 / 552 110 / 758 100 / 689 Quenched and tempered Distinct heat-treatment condition from Type 1
L80 Types 1, 3Cr, 9Cr, 13Cr 80 / 552 95 / 655 95 / 655 Quenched and tempered Types have different chemistry; evaluate the actual corrosive environment
C90 90 / 621 105 / 724 100 / 689 Quenched and tempered Controlled hardness; sour service requires environmental qualification
R95 95 / 655 110 / 758 105 / 724 Quenched and tempered Higher yield than L80 without implying sour suitability
T95 95 / 655 110 / 758 105 / 724 Quenched and tempered Controlled hardness; check SSC requirements
C110 110 / 758 120 / 828 115 / 793 Quenched and tempered High strength with controlled hardness; verify the service envelope
P110 110 / 758 140 / 965 125 / 862 Quenched and tempered High mechanical strength; strength alone is insufficient for H₂S service
Q125 125 / 862 150 / 1,034 135 / 931 Quenched and tempered Very high strength; requires detailed combined-load review

For H₂S exposure, assess the service environment and material limits under the applicable ISO 15156 requirements, including H₂S partial pressure, temperature, chloride content, pH, stress, and hardness, together with operator requirements. 

API Casing Connection Types, Characteristics and Selection Considerations

Connection selection affects clearance, axial capacity, sealing behavior, and running procedures.

Connection Designation Full Name API Standard or Proprietary Key Characteristics Selection Considerations
SC/STC Short round thread casing API 5B Round thread with shorter engagement Lower-load strings where verified joint ratings are adequate
LC/LTC Long round thread casing API 5B Longer round-thread engagement than SC Check tensile and internal-pressure joint ratings
BC/BTC Buttress thread casing API 5B Buttress form designed for greater axial load transfer Common for heavier strings; verify seal and combined-load limits
Premium Manufacturer-specific connection Proprietary May use metal-to-metal seals, torque shoulders, or special thread forms Require exact design, qualification level, make-up torque, and inspection criteria

SC/STC, LC/LTC and BC/BTC casing thread comparison

Using the Table for Preliminary Casing Selection

Use the table to screen dimensional candidates. Final selection requires calculated pipe-body and connection performance under the project load cases. The guide to API 5CT casing applications explains how requirements change by casing-string position.

Define the Casing String Function and Required OD

Identify whether the string is conductor, surface, intermediate, production casing, or a liner. Select an OD that fits the planned hole while preserving cementing clearance and sufficient drift for tools, tubing, and completion equipment.

Generic conductor, surface, intermediate and production casing cutaway

Check Collapse, Burst, Tensile Loads and Service Conditions

Calculate collapse, burst, axial tension, and relevant combined loads for installation, cementing, pressure testing, production, intervention, and credible upset cases. Apply the project’s design factors, then evaluate temperature, H₂S, CO₂, chlorides, wear, and connection sealing.

Casing collapse, burst and axial tension load directions

Compare Candidate Specifications and Document the Selection Basis

For standard catalog selections, compare the size, mass, grade, and end-finish combinations listed in the governing API 5CT edition. Document separately any agreed special plain-end dimensions or proprietary connections. Record load cases, design factors, calculated ratings, environmental limits, drift requirements, and connection data. Available API 5CT seamless casing pipe options still require confirmation against the final purchase specification.

API 5CT Standard and Data Notes

This article references API Specification 5CT, 11th Edition, December 2023, with Addendum 1 and Errata 1 through 3. The 11th Edition removed the former formal PSL structure, so legacy PSL terminology should not replace current edition-specific requirements.

API 5CT covers technical delivery conditions, dimensions, grades, testing, marking, and related product requirements. API 5B governs API thread dimensions, gauging, and thread inspection. Calculate pipe performance using the edition of API RP 5C3 or ISO/TR 10400 specified for the project, then apply the project’s approved load cases, design factors, and connection-performance data. 

For specification review or quotation, contact Baolai with the casing OD, mass or wall thickness, grade, connection, quantity, and service conditions. These inputs support availability and technical checks.

API Casing Table FAQs

Is API Casing the Same as Drill Pipe?

No. Casing supports and isolates the wellbore, while drill pipe transmits rotation, axial load, and drilling fluid during drilling. API 5CT covers casing; drill pipe is generally specified under API 5DP. 

Are All API Casing Size and Grade Combinations Commercially Available?

No. API 5CT lists permitted combinations, but mill capability, connection choice, order quantity, and current production programs control commercial availability. Confirm the exact size, mass, grade, process, and end finish with the manufacturer.

What Is the Difference Between API 5CT and API Spec 5B?

API 5CT defines technical delivery requirements for casing, tubing, couplings, and related materials. API 5B defines dimensions, gauging practices, and inspection requirements for standardized API threads.

What Markings Should Appear on API 5CT Casing?

Required markings depend on the product and order, but generally identify the manufacturer, API specification, size, mass, grade and type, manufacturing process, heat-treatment condition, and end finish. Traceability identifiers and color bands may also apply.

Which Documents Verify API 5CT Casing Compliance?

Verification normally requires the product certificate or mill test certificate, heat or lot traceability, chemical and mechanical test results, dimensional records, and applicable hydrostatic, NDE, hardness, or impact-test records. Match the documents to the pipe markings, purchase order, specified edition, and supplementary requirements.

Casing outside diameter measurement and ultrasonic wall thickness inspection

External Sources

AUTHOR PROFILE

Agnes Li

Agnes Li is the Operations Manager at Baolai Steel Pipe, with 3 years of steel pipe industry experience and 7 years in international digital marketing. She focuses on steel pipe manufacturing processes, specifications, standards, corrosion protection, and engineering applications. Her writing connects these technical details with service conditions, explaining how product differences affect performance and suitability for specific applications.
Picture of BaoLai Official
BaoLai Official

Blog post by BaoLai Official

CONTACT US